Ceiling Painting in Markham, ON

Ceiling painting in Markham finishes a smooth or textured ceiling with drywall sealer and two coats of flat paint, and it is the last step of every removal we do. It is for Markham homeowners whose ceiling is sound but tired, and for anyone adding pot lights who wants the openings cut and painted around before the electrician arrives. You get a ceiling that reads as one even plane under window light, with no roller marks and no flashing where a patch was primed on its own.
What Ceiling Painting Involves
Fresh compound and old paint drink paint at different rates, so the first coat on any ceiling we touch is a drywall sealer that evens the surface out. Then two coats of flat ceiling paint, rolled in one direction with a wet edge, because flat paint hides the small waves no ceiling is without and satin shows every one. We cut in with a brush at the walls and around every fixture.
Fixtures come down with the power off at the panel and go back up at the end, and we tape and poly the walls, floors and cabinets before the first drop. On a textured ceiling we use a thick-nap roller and more paint, and we tell you at the quote that paint seals the texture in place for good.
When You Need It
A ceiling needs paint after any removal or skim, after a repair, when a stain has been fixed at its source, and when old paint has yellowed over a kitchen or a wood stove. It also needs paint before a sale, because a buyer's eye goes to the ceiling in listing photos first. If the ceiling still has texture you dislike, paint is the wrong first step; the stucco ceiling removal and textured ceiling smoothing pages explain why painting texture makes its later removal cost more.
Pot Lights and the Licensed Electrical Contractor
Pot lights are the most common reason Markham homeowners call us, and the sequence matters. We mark and cut the openings before the skim coat so the compound finishes clean to each edge, and we paint before the trims go in.
The wiring is electrical work, and in Ontario the Electrical Safety Authority says you must hire a Licensed Electrical Contractor, who carries a seven-digit ECRA/ESA licence number and files a notification of work with ESA. We are not one. Our partner is [LEC NAME, ECRA/ESA #(343) 947-5029], and the rough-in inspection happens before our skim conceals the wiring.
What Affects the Price
Square footage and ceiling height set the base. A textured ceiling takes more paint and more time per foot than a smooth one. Stairwells and two-storey foyers add scaffold. A ceiling that needs repair first picks up a line from the ceiling repair and skim coating page. Pot-light openings are priced per opening; the electrician quotes the wiring. Colour does not change the price, and we recommend a flat white or off-white unless the room has a reason for something else.
Ceiling Painting FAQs
Sealed, Painted, Lights In
Written quotes after an in-home visit, with the electrician's work scheduled alongside ours.
